HERITAGE USER MANUAL
Sun-and-moon automatic watch
Video tutorial
User manual
With the crown at position I, turn it clockwise approximately 30 times to start the watch.
Note: Your Heritage automatic watch is powered by wrist movement. If it has not been worn for more than 24 hours, wind it manually.
1. Pull the crown out to position II.
2. Turn the crown clockwise to set the correct time.
3. Push the crown back to its original position. The seconds hand will start moving immediately.
The sun-and-moon display completes one cycle every 24 hours and adjusts automatically when you set the time.
Use the adjustment tool to press button A to adjust the year.
Note: The year does not adjust automatically when you change the month or date. Press button A to change the year.
Press button B to adjust the month.
Note: The month does not adjust automatically when you change the date. Press button B to change the month.
Before setting the date:
Make sure the watch shows 12 noon and the sun-and-moon indicator points to the 12 o'clock position.
Press button C to adjust the date.
Before setting the day:
Make sure the watch shows 12 noon and the sun-and-moon display points to the 12 o'clock position.
Use the adjustment tool to press button D to adjust the day.
Note:
When setting the day, make sure the subdial hand points directly at the correct day. The space between two days does not represent noon.
1. Slide the quick-release lever on the back of the strap inwards to remove the strap.
2. Position the replacement strap.
3. Insert one end of the spring bar into the lug hole, then slide the lever inwards to fit the other end into the opposite lug hole.
1. Insert the supplied strap adjustment tool into the opening in the clasp.
2. Gently press the tool down to lift the adjustment plate.
3. Slide the clasp to suit your wrist, then press the adjustment plate firmly back into place.
⮕ Watch the full strap tutorial
1. Hook the clasp onto the crossbar and pull down to make sure it is securely engaged.
2. Close the safety clasp.
Note: After putting on the watch, make sure the clasp is securely fastened.